Universal Laser Systems CLP-100NI-NPRT Instrukcja Użytkownika Pobierz pdf (Strona 32)

MAINTENANCE

PRINT DRUM INDEX MECHANISM CONVERSION

1- Using a 5/64” hex wrench, loosen the Nylon Tip Set Screw

located in the top rim of the Print Drum.

2- Remove the Print Drum Dust Cover.

3- To relieve the spring tension on the index mechanism, ro-

tate the Print Drum approximately 3/4 turn. The Index Com-

pression Springs will now be in the fully extended (relaxed)

position.

FIGURE 57

FIGURE 58

FIGURE 59

4- Using a 5/32" hex wrench, remove the two Index Ramp Mount-

ing Screws which are located on the under side of the Coder

Baseplate. The Index Ramp will be reinstalled in the oppo-

site orientation to allow the Print Drum to turn in the reverse

direction.

FIGURE 60

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 44 45

Brak uwag

Universal Laser Systems CLP-100NI-NPRT Instrukcja Użytkownika Strona 32