Universal Laser Systems Laser Platform M-300 Instrukcja Naprawy Pobierz pdf (Strona 8)

1-2 Safety

• Dangerous voltages are present within the electronics and laser enclosures of this

system. Although access to these areas is not necessary during normal use, if it becomes

necessary to open one of these enclosures for service reasons please remember to

disconnect the power cord from your electrical supply.

• Care should be taken when moving or lifting this device. Obtain assistance from 1 or 2

additional people when lifting or carrying. Severe bodily injury may occur if improper lifting

techniques are applied or the system is dropped.

• This device is specifically designed to comply with CDRH performance requirements

under 21 CFR 1040.10 and 1040.11. CDRH is the Center for the Devices of Radiological

Health division of the Food and Drug Administration (FDA) in the USA. It also complies with

CE (European Community) safety regulations. No guarantees of suitability or safety are

provided for any use other than those specified by Universal Laser Systems, Inc.

Laser Safety

• The device contains a sealed carbon dioxide (CO2) laser in a Class I enclosure that

produces intense invisible and visible laser radiation at a wavelength of 10.6 microns in the

infrared spectrum. For your protection, this enclosure has been designed to completely

contain the CO2 laser beam. However, the intense light that appears during the engraving

or cutting process is the product of material combustion or vaporization. DO NOT STARE

AT THE BRIGHT LIGHT OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS.

• This device may contain a visible red laser diode (Class IIIa). DO NOT STARE AT THE

RED LIGHT OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS.

• The user door is safety interlocked and will disable the invisible CO2 laser beam from firing

when the user door(s) are opened. However, since the red diode laser produces visible light,

is NOT safety interlocked and can be activated with the door(s) either open or closed.

• Do not operate any system that has had its safety features modified, disabled, or removed

as this can expose your eyes and skin to invisible and visible CO2 laser radiation which can

cause permanent blindness and/or severe burns to your skin.

• Improper use of controls and adjustments, or performance of procedures other than those

specified in this manual, may invalidate the safety of this system.

Safety Labels

CDRH and CE regulations require all laser manufacturers to affix warning labels in specific

locations throughout the equipment. The following warning labels are placed on the laser

system for your safety. DO NOT remove them for any reason. If the labels become damaged

or have been removed for any reason, DO NOT OPERATE the laser system and immediately

contact Universal Laser Systems, Inc. for a free replacement. Labels are NOT to scale

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 99 100

Brak uwag

Universal Laser Systems Laser Platform M-300 Instrukcja Naprawy Strona 8